All for Joomla All for Webmasters

Anritsu Radio Communication Analyzer Supports LTE-Advanced Testing


Tomorrow’s Wireless Testing Today

The MT8821C Radio Communication Analyzer is designed for R&D of mobile devices / user equipment (UE), such as smartphones, tablets and M2M modules. It builds on the technologies of its popular predecessor, the MT8820C, preferred by UE and chipset vendors worldwide. The new MT8821C supports all technologies, ranging from LTE-Advanced to 3G/2G, with its easy-to-use measurement functions for efficient RF adjustment and testing in one unit. It even supports LTE-A 3CC and 4CC Carrier Aggregation with 2×2 MIMO in a single box as well as LTE-U/LAA.

RF TRX Measurement

3GPP UE RF Measurement

With built-in support for the UE RF TRX tests compliant with the various communications standards, such as the LTE Unlicensed (LTE-U/LAA) in the 5 GHz band, the MT8821C is the ideal test solution for any measurement scenario. Supports communication technologies include LTE/LTE-Advanced, W-CDMA/HSPA, GSM/EGPRS, TD-SCDMA/HSPA and CDMA2000 1X/1xEV-DO.

One-touch Settings and PASS/FAIL Judgment

The MT8821C simplifies measurements with its preset measurement parameters based on the 3GPP specified RF test cases.

Remote Control Sample Tool

The MT8821C can be configured in an automated test system using either GPIB or Ethernet for remote control. Anritsu also provides a 3GPP RF test standard compliant automatic remote control sample tool called ATS.
Even new users can easily configure an automated test environment, which reduces training time and increases productivity.

Flexible Parameter Setting

The MT8821C runs TRX measurements using the parameters specified by the 3GPP/3GPP2 RF test standards. In addition, the flexible parameter settings support both RF parametric and simple protocol testing.

RF Calibration

With high-speed measurement modes supported by chipsets vendors, the MT8821C increases measurement efficiency by reducing the time required for RF calibration of cellular chipsets and devices.

Enhanced GUI for Efficient Operability

The new MT8821C’s next-generation windows-based GUI and easy-to-use large touch panel significantly enhance operability and visibility, compared to other instruments. Users can operate the MT8821C by simply touching and swiping the screen, as well as benefit from the ease and speed of one-touch switching between grouped/individual graph lists and results outline/detail displays.

Built-in Windows Server PC for IP Data Throughput Testing

With the built-in Windows 7 PC, you can execute IP data transfer tests without an external server PC. The MT8821C supports 450 Mbps Cat.

Built-in Flexible Internal RF Front End

The MT8821C has a built-in internal RF front end with switches and RF dividers to eliminate the need for external combiners or a test set, thus simplifying test setup and calibration. The signals can be combined for conducted measurements or output each carrier aggregation and MIMO downlink signal to separate ports for OTA testing. It even has a port to insert the signal from an interfering signal generator or output the uplink signal to an external spectrum analyzer for out-of-band spurious measurements.

Functional Testing

The MT8821C is also ideal for

  • OTA (Over-The-Air) testing
  • Power consumption testing
  • Inter-RAT measurement report testing, Dual SIM (DSDA) testing, or SVLTE
  • End-to-End IP Data Throughput Testing

Backwards Compatibility/MT8820C to MT8821C Upgrade

Since the new MT8821C’s remote commands maintain good backwards compatibility with the legacy MT8820 series, the MT8821C supports the previously used remote tools, helping reduce costs when configuring automated test environments.
Anritsu also offers an upgrade path from the MT8820C to the MT8821C, making full use of the existing MT8820C hardware and software to maximize previous investment in the MT8820C and keep MT8821C costs down.

Wireless Communication Tester for UE Development

  • Supports all cellular technologies compliant with 3GPP/3GPP2 UE RF TRX tests including LTE/LTE-Advanced, W-CDMA/HSPA, GSM/EGPRS, TD-SCDMA/HSPA, CDMA2000 1X/1xEV-DO
  • Supports LTE-Advanced Carrier Aggregation 4CC with MIMO tests in one unit
  • Next generation GUI with large touch panel
  • Supports up to 6 GHz
  • 160 MHz wide frequency bandwidth (Generator/Analyzer)
  • Backwards compatibility with the MT8820 series

Contact: Tel: +91-80-40581300 | Email: ACIN-SALES@ANRITSU.COM; | Web:



Leave a Reply

Your email address will not be published. Required fields are marked *